Blog Details

Home Blog

YOUGE October New Letter

2024-10-22

latest company news about YOUGE October New Letter 0

In order to let more customers know YOUGE mould,Next, I will introduce the aluminum mold and show you.

Q1 How to make aluminum mold?

The wall thickness of the cavity is controlled at about 10mm, the edge is about 15mm, and the uneven wall thickness of the mold will cause the uneven wall thickness of the rotomized products.The cooling of the deep cavity or narrow strip is usually to increase the heat dissipation bar in the part, the number or height of the bar depends on the specific situation, the thickness of the bar is less than the thickness of the mold wall,generally 5mm is appropriate.

Q2 The characteristics of the rotomolding Process.

1.Low cost of rotoplastic mold - products of the same size, the cost of rotoplastic mold is about 1/3 to 1/4 of the cost of blow molding and injection mold, which is suitable for molding large plastic products;

2.the edge strength of the rotomized product is good - the thickness of the edge of the product can be achieved by rotomizing more than 5 mm, completely solving the problem of thin edges of hollow products;

3.rotoplastic can be placed a variety of inlays;

4. the shape of the rotomolding product can be very complex, and the thickness can exceed 5 mm or more;

5.rotomolding can produce fully closed products;

6.rotoplastic products can be filled with foam material to achieve insulation;

7.without adjusting the mold, the wall thickness of the rotomized product can be freely adjusted (more than 2mm).

Contact us if you want to know more !

Email: maggie1661@126.com sam5528@126.com

Tel: +86 159 0056 7221 +86 137 6122 5349

Blog Details

Home Blog

YOUGE October New Letter

2024-10-22

latest company news about YOUGE October New Letter 0

In order to let more customers know YOUGE mould,Next, I will introduce the aluminum mold and show you.

Q1 How to make aluminum mold?

Q2 The characteristics of the rotomolding Process.

3.rotoplastic can be placed a variety of inlays;

4. the shape of the rotomolding product can be very complex, and the thickness can exceed 5 mm or more;

5.rotomolding can produce fully closed products;

6.rotoplastic products can be filled with foam material to achieve insulation;

7.without adjusting the mold, the wall thickness of the rotomized product can be freely adjusted (more than 2mm).

Contact us if you want to know more !

Email: maggie1661@126.com sam5528@126.com

Tel: +86 159 0056 7221 +86 137 6122 5349

Aluminium Rotational Molds

Rotomolding Molds

Plastic Fuel Tank

Roto Moulded Water Tanks

Plastic Underground Tanks

Roto Molded Storage Box

Plastic Mooring Buoys

Custom Kayak

Roto Molded Furniture

Garden Planter Molds

Floor Scrubber Equipment

Rotational Molding Products

Rotomolding Machine

Aluminium Rotational Molds

Rotomolding Molds

Plastic Fuel Tank

Roto Moulded Water Tanks

Plastic Underground Tanks

Roto Molded Storage Box

Plastic Mooring Buoys

Custom Kayak

Roto Molded Furniture

Garden Planter Molds

Floor Scrubber Equipment

Rotational Molding Products

Rotomolding Machine

YOUGE October New Letter